xtrememotorwork Posted January 31, 2011 Share Posted January 31, 2011 So I picked up a 84 GL from a guy that broke down in my parking lot. Found the ignition switch connector was melted and no get power through it. So I spliced them together until I can get the correct connector. Started it up and drove it all day, ran good besides it wont idle(another problem lol) So it was running today and all of a sudden it died. Motor turns over, but no power at coil and no dash light. My free time is limited so i thought I would see if you guys could help me out! Thanks,Willie Link to comment Share on other sites More sharing options...
Turbone Posted January 31, 2011 Share Posted January 31, 2011 I suspect the "new" ignition connection you made. Which end melted? The key end or the ign end? Link to comment Share on other sites More sharing options...
xtrememotorwork Posted January 31, 2011 Author Share Posted January 31, 2011 I thought so to but i'm getting power at both sides of where i soldered them together. Kinda hard to tell but I think it was the black with white strip that was melting/melted the connection. Also the ecu was flashing one long flash followed by one short one. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now