G'day all

 

I'm after information about replacing the uni joints in the tail/prop shaft?

 

I know the subaru uni joints are non replaceable from factory but I'm looking for a mod/part that can get around this setup so that I can replace the dead/dying units.

 

If anyone has some info/experience with this please let me know.

 

Cheers

 

Bennie

Subaru says they aren't replaceable, but some patience and a 20 ton press changed out a set several years ago. It hasn't come up for me since.

 

That said, any decent driveline shop should be able to cut the shackles off your drive shaft and replace them with something more useful.