November 24, 201114 yr The drivers side belt wants to work its way backward, toward the engine block, any ideas? It will start to shave itself thin.
November 25, 201114 yr Perhaps the cam is loose? Try tightening down all three screws holding it down (10mm) and the tensioner as was mentioned (12mm).
November 25, 201114 yr maybe the crank sprockets are backwards or in the wrong order. they will fit either way, but are supposed to fit one way. The lip on the inner is a little different than the outer one. the one with the rollpin(if present) should be on the outside behind the crank pulley
November 25, 201114 yr Author maybe the crank sprockets are backwards or in the wrong order. they will fit either way, but are supposed to fit one way. The lip on the inner is a little different than the outer one. the one with the rollpin(if present) should be on the outside behind the crank pulley I'm thinking it might be this. Peeking in there, I dont see that little lip that should be on the block side. I think thats whats doing it. I need to find a pic to see what it supposed to look like, to be sure.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now