Upon removing my EA81 intake manifold, the crossover pipe managed to donate its contents to the cylinders. What's the best way to dry them out without pulling the whole thing apart?

Simply pull the spark plugs and crank it over for 30 seconds twice. Shoot some carb cleaner in the intake ports on the second time. Good to go.

most important thing is to not leave coolant in the cylinders. It'll rust the walls and rings.

Get it out and dump some oil in there to keep it from rusting. Or just run it.

kill the spark from the coil to distributor, if you crank over after injecting a flammable solution... I had it jet out, hit the dangling plug wire arcing to the block and instant fire! hahahaha...

Thanks! A puddle of coolant, and no fires!