i love the d/r awd, but its sadly going down hill. it sounds like i have metal flinging around in it and can hear a rough sound like bearings while cruising and excessive input shaft play:horse:. i have a push button 4wd tranny from turbo wagon, and im wondering if it would be a bolt on fit, both have 3.7 rear diffs, or is a lot of internal parts same to fix the awd one?

it is a direct bolt on, and the diff lock switch will be the 4wd. the vacuum diaphragm between both trans is the same.

 

it all fits the same except there is no d/r lever on the donor.

Hi. I think you'll find the turbo out put shafts will be 27 splines and the D/R are 25. IIRC you need turbo half shafts. Luck with your project. S.

Hi. I think you'll find the turbo out put shafts will be 27 splines and the D/R are 25. IIRC you need turbo half shafts. Luck with your project. S.

 

Turbo axles are 25 spline and Non turbo axles are 23 spline.

 

if both transmissions are 3.7:1 Diffs it is likely that both are turbo trans with 25 spline

they both are turbo ones with 3.7, thanks for the input