The shifter does not want to slide thru the gears with the engine off or on. reverse did grind with the motor running so I know the clutch needs adjustment. Any tips on adjusting the clutch?

 

How about adjusting the shift linkage. Any tips there?

It is a 5 speed in the 86 Brat.

 

My thanks to the forum.

Mike

5speed in a brat? Did you swap it?

 

There are adjusting nuts on the cable where it goes through the clutch fork. You should have about 1/4" play at the fork, and have a return spring.

If the clutch isn't disengaging the cable is probably getting old and stretching, tighten it up a bit.