So I put some scratches in my oil pan friday night, decided to take an old EA82 skidplate and refab it to work on an EJ car.

 

Cost = nothing everything was scavenged out of the garbage

Measurements = I eyeballed the skid plate, marked it with a paint marker, split the plate in half. The two mounting holes on the rear of the skidplate need to be wobbled out some (EJ mounting position is a 1/2" wider than the EA82 holes.

 

The front is just a piece of 2x2 angle and then a 3/4" piece of angle.

 

Buddy welded it up.

 

 

 

Craftiness at it's finest.