im doing a 4 inch lift on a 91 legacy- what mods to the 5 speed shifter are necessary?

make a drop down bracket to lower the shifter.   take out the 2 bolts that hold the rubber bushing bracket into the tunnel of the car and add metal down a few inches.  I used angle iron for my 6 inch lift.  had to space it witha  few washers to get it all into the right spot but it works

thanks man

if my car wasnt covered in mud, I'd climb under it and take pictures of what my setup looks like.    IF you really need the picture, I can go hose off the car and snag a photo