bratman18 Posted September 26, 2013 Share Posted September 26, 2013 If I have an 88 5spd turbo full time 4wd diff lock tranny, is it possible to swap the tail shaft section over onto a regular 5 spd dual range and then have a dual range with diff lock and full time 4wd? I know I have read stuff about this before, but I couldn't find the answer when I searched. And please forgive my ignorance! I haven't worked with the turbo transmissions at all! Thank you! Quote Link to comment Share on other sites More sharing options...
Gloyale Posted September 26, 2013 Share Posted September 26, 2013 (edited) And as far as swapping, it isn't easily possible. The pinion shaft in the difflock cars are alot longer. Search around, there were Dual Range fultime/difflock trannies used in 87-89 RX's Edited September 26, 2013 by Gloyale Quote Link to comment Share on other sites More sharing options...
bratman18 Posted September 26, 2013 Author Share Posted September 26, 2013 Ok good to know. I have the opportunity to buy a car with this, and was hoping to combine my dual range, and gain the fulltime 4wd with diff lock. But I guess it's not possible. Thank you Quote Link to comment Share on other sites More sharing options...
coxy Posted September 30, 2013 Share Posted September 30, 2013 Building this style of tranny with an RX Full Time as a basis is covered very well on AuSubaru Board with plenty of Pics as well. Quote Link to comment Share on other sites More sharing options...
bratman18 Posted September 30, 2013 Author Share Posted September 30, 2013 Building this style of tranny with an RX Full Time as a basis is covered very well on AuSubaru Board with plenty of Pics as well. Link? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.