So last friday i had my car running and it died when it ran out of gas and now it wont start. The timeing is on belts are good i pulled the plugs cleaned them checked the gap and made shure i had spark. Also checked and it is getting fuel so i dont know what to do plus i have a good combo switch and good fuse amd blinkers dont work please i need help soon or im gonna have to sell it

Any firing at all when cranking? Check the set screw on the rotor. Verfiy the MAF connector isn't loose.

Edited October 1, 201312 yr by MR_Loyale

Both good and no fireing at all

Edited October 1, 201312 yr by 91_EJ_22

Did blinkers quit working at the same time the no-start began?

No they havent worked since i got the thing

If you crank with the distrutor cap removed, does the rotor spin?

Spray some starting fluid into the intake and see if that gets some engine fire going. If that doesn't work then you need to check spark through the plugs. If that is okay then you need to check the compression.

 

For the blinker problem try cycling the emergency flasher switch a number of times to see if that makes the blinkers work. If that doesn't work then you need to start checking power through the circuit with a tester.

Well its for sale 400obo must be sold by thursday at noon

PM sent