Ok recently  (before my crank Pully issue)   I had replaced the Heater core in my 96 legacy wagon , 2.2

 

Everything works but the emergency flashers and the turn signals. 

 

The lights on the the left lever work,, but when I use the lever as a turn signal,, it don't work. 

 

same with the 4 way flashers,,   Nothing...

 

I know I had the dash out,,   but if I messed something up,, I really don't know what I did.

 

Any help in fixing this would be appreciated.  IM an electrical moron.

 

Thanks.

Did you plug the emergency flasher button back in when you installed the vent panel?

 

Most likely that's it.

I thought I did.      would that effect the turn signals too?  

 

I cann pull that vent panel and check it.. but if its plugged in ,, then what?

I thought I did.      would that effect the turn signals too?  

 

I cann pull that vent panel and check it.. but if its plugged in ,, then what?

Yes the turn signals go through the emergency switch.

Thanks lmdew,,  that was indeed the problem,, forgot to plug in the emergency flasher under the front panel.. All is well.

Glad you got it!  Just hit the USMB EASY BUTTON