January 19, 201511 yr Okay I'm just curious I'm almost certain I don't need these for my RX Turbo EA82 I'm just curious I'm not even familiar with these gaskets on any ea82 engine If you could tell me where they going what they are that would be awesome thank you guys
January 19, 201511 yr Upper left is a Hitachi carb base gasket and the upper right is a tbi gasket. No clue on top center or bottom two.
January 19, 201511 yr Author Upper left is a Hitachi carb base gasket and the upper right is a tbi gasket. No clue on top center or bottom two. I thought the TBI Gasket was more like an o-ring type of material? I see if anybody else can play the guessing game lol
January 19, 201511 yr I think the bottom 2 look like oil fill tube gaskets, the top right looks possibly like a gasket for a turbo or mpfi tb. The tbi used an o-ring. Middle one doesnt look familure, and top left has been identified by skishop.
January 19, 201511 yr I believe the center one is an IAC gasket and the bottom two are spider intake coolant crossover gaskets.
January 19, 201511 yr Confirming what Caboobaru says above, the bottom two green ones are the coolant transfer gaskets on the lower back section of mpfi inlet manifold (maybe not spider specific) - very handy for when you replace those small 12 & 14? mm welch plugs at the back. The large green one looks like spider TB to inlet manifold gasket - they are not same as mpfi non spidey Edited January 19, 201511 yr by jono
January 19, 201511 yr Thank you for correcting me. Shouldn't have said tbi. Force of habit. Both my EA82's have spider manifolds so just plain tb. My bad.
January 20, 201511 yr Author I must be brain farting What is spider manifold? Is that just a fancy way of saying multiport fuel injection Like my turbo EA82 is
January 20, 201511 yr www.google.com EA82 spider manifold image shazam! came on XT turbo and some others ? Looks more an EJ style of inlet manifold over the old shar[p angle old mpfi EA82 inlet. It is a 4 legged spider not got 8 legs ! Edited January 20, 201511 yr by jono
January 20, 201511 yr Author www.google.com EA82 spider manifold image shazam! came on XT turbo and some others ? Looks more an EJ style of inlet manifold over the old shar[p angle old mpfi EA82 inlet. It is a 4 legged spider not got 8 legs ! Oh yeah I knew that Like I said I was brain farting the older Impreza they had the 1.8 right I have never seen an XT with that motor I've seen them with the EA82 to multiple fuel injected Like what's in my 86 rx
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now