smokeeater495 Posted December 21, 2015 Author Share Posted December 21, 2015 The thin brown wire that should go to the reset button has been spliced into the remote start box. Quote Link to comment Share on other sites More sharing options...
smokeeater495 Posted December 31, 2015 Author Share Posted December 31, 2015 The car is now running. I removed the aftermarket remote starter from the factory wiring harness. Who ever installed it did not follow the instructions. They tapped into or cut the wrong wires. We restored the harness to factory condition and she fired right up. I want to thank everyone for their guidance and suggestions. 1 Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted December 31, 2015 Share Posted December 31, 2015 Alright! Glad to hear its running again! Quote Link to comment Share on other sites More sharing options...
smokeeater495 Posted January 1, 2016 Author Share Posted January 1, 2016 Now I need to figure out why the key won't release from the ignition. It won't rotate into the lock position. Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted January 2, 2016 Share Posted January 2, 2016 It's an automatic right make sure it's shoved all the way into park. I can't remember if the late 90's soobs do it but my '94 that happens a lot where the key won't move so I can remove it and I have to give it a little extra push into park until something clicks even though it's already in park. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.