kmpdx Posted February 8, 2017 Share Posted February 8, 2017 Hi Guys, Chasing a vacuum and coolant leak and have removed and replaced the intake manifold gaskets and loads of other work since I found so many issues while moving everything around. So the bracket that the rubber fuel and I believe a vacuum line that run between the area near the driver area to the injector. There is a bracket that supports the hoses that was not attached when I pulled everything apart. Now that I am assembling I would like to attach the bracket back but am not sure where it bolts to. The only thing that seems reasonable in the intake manifold long bolts which doesn't seem right. I have scoured manuals, pics and videos. any body know where this thing bolts? it appears to only have one bolt hole. Anybody point me in the right direction? Thanks! Link to comment Share on other sites More sharing options...
DaveT Posted February 8, 2017 Share Posted February 8, 2017 Yes, that bracket goes under one of the intake bolts. 1 Link to comment Share on other sites More sharing options...
kmpdx Posted February 9, 2017 Author Share Posted February 9, 2017 Thanks DaveT! Hopefully getting this thing back together and running tomorrow. Really appreciate it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now