The Scooby Posted June 15, 2004 Share Posted June 15, 2004 ok, how would i hook this up on my stock settup, my motor is all stock and i cant weld aluminum unless someone can come and weld it for me. Link to comment Share on other sites More sharing options...
calebz Posted June 15, 2004 Share Posted June 15, 2004 If you ca'n't weld aluminum, or find someone that can, you're stuck. At least with that style of valve. If you could find a flush mount, like the WRX BPV, you could get away without welding anything.. but it would take a lot of sealant. Added note. If you are running stock boost, the BPV is unnecessary.. if you are much above stock boost, you should have an IC, which will change the way the BPV is plumbed anyway. Link to comment Share on other sites More sharing options...
The Scooby Posted June 15, 2004 Author Share Posted June 15, 2004 ya i know, im trying to get a turbo timer, boost controller, gauges (a/f, boost/vacume, and EGT) and get a intercooler settup like yours with H20 sprayer settup, and a electric fan pushing air through the intercooler until i can get a scoop to fit my hood. If you ca'n't weld aluminum, or find someone that can, you're stuck. At least with that style of valve. If you could find a flush mount, like the WRX BPV, you could get away without welding anything.. but it would take a lot of sealant. Added note. If you are running stock boost, the BPV is unnecessary.. if you are much a bove stick boost, you should have an IC, which will change the way the BPV is plumbed anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now