Hey Guys, this is created for the experience or already converted 4 lug to 5 lug drivers to help others who want to achieve the same specifications.

 

The front of the Leone Seems to be straight forward to convert to 5 lug 5x100 but the rear end seems to be a challenge given that the XT6 model is rare. I can't get any rear end parts.

 

Could you guys list your rear end set up for 5 lug 5x100? Specifically substitues for XT6 parts

.

Edited April 27, 20178 yr by Suber_Tony

The rear hubs are the only hard part. XT6 are the only OE parts that will fit.

 

Crossbred performance in Australia used to make aftermarket ones to go with their kit, but they no longer do. Might be able to get your hands on a used set....

 

This guy made a run of 10, and sounds like he's going to make another (you might want to skip towards the end of the thread where there's discussion about the actual process):

http://www.ultimatesubaru.org/forum/topic/156161-xt6-rear-hubs-eoi-in-5x100-5x1143/

 

 

I've been working on a FAQ, with some links and information about the 5-lug swap:

http://www.ultimatesubaru.org/forum/topic/162614-retrofitting-faq/

. I can't get any rear end parts.

.

 

They're XT6 only.  

 

If you want a rare part cheap and easy it's likely to take longer.  Wait or make a good offer and you'll get a set.