July 22, 20178 yr Help, the passenger side headlight head light housing is about 2/3 full of water. I guess it's remove, reseal, and re-install. Does the bumper front cover need to be removed? Thank you. Edited July 22, 20178 yr by The Dude
July 22, 20178 yr no, you should not need to remove the bumper cover.. grille, most likely will need to be removed attached is the FSM page for my 2002 Forester, yours may be a little different, but it should give you a general idea. Headlight Assembly.pdf
July 22, 20178 yr no, you should not need to remove the bumper cover.. grille, most likely will need to be removed attached is the FSM page for my 2002 Forester, yours may be a little different, but it should give you a general idea. actually for an 06 I do think the bumper cover comes off to get headlights. Since they eliminated the small removable panel just below the lights. The bumper skin includes the grill too. I would buy a new fixture. That year range is known for problems with this.
July 22, 20178 yr actually for an 06 I do think the bumper cover comes off to get headlights. Since they eliminated the small removable panel just below the lights. The bumper skin includes the grill too. I would buy a new fixture. That year range is known for problems with this. Yeah, I guess it does need to come off... just found this out ... http://jdmfsm.info/Auto/Japan/Subaru/Forester/2006/Forester%202006/ (click on "index", the letter "H", then "headlight assembly - removal") Edited July 22, 20178 yr by heartless
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now