March 21, 20233 yr I have a mostly intact steering column clamshell from a 1986 XT 4 cylinder and one for an XT6 with the right side of the top piece broken. Is it possible to have these scanned so I can have the full part with the gap for the windshield washer stalk? Also, has anyone put 19" wheels on an XT6 (or other ea82)? Any mods required?
March 21, 20233 yr 10 hours ago, linkthehero1234 said: I have a mostly intact steering column clamshell from a 1986 XT 4 cylinder and one for an XT6 with the right side of the top piece broken. Is it possible to have these scanned so I can have the full part with the gap for the windshield washer stalk? Also, has anyone put 19" wheels on an XT6 (or other ea82)? Any mods required? "scan", for 3D printing? Yes it can be done for hundreds of dollars. Not all XT(6) steering column covers are interchangeble. Total tire diameter depends what struts you have. 225/60/16 tires on mine now would allow for 19" if they're low profile. But again itll depend what struts you have. Most are converted to something else by now, if you have impreza struts up front you'll be more limited.
March 24, 20233 yr Author Ok, I'll return it to pick n pull and use the store credit. Can I use the clutch pedal from an XT in an XT6?
March 26, 20233 yr On 3/25/2023 at 7:05 AM, linkthehero1234 said: Ok, I'll return it to pick n pull and use the store credit. Can I use the clutch pedal from an XT in an XT6? just the pedal itself or the whole pedal and box assembly ?
March 27, 20233 yr On 3/24/2023 at 4:05 PM, linkthehero1234 said: Ok, I'll return it to pick n pull and use the store credit. Can I use the clutch pedal from an XT in an XT6? It's a been awhile but I'm fairly certain those are identical.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now