David C Posted July 18, 2004 Share Posted July 18, 2004 My timing belt/seals/water pump project has gone well with the help of this board, but now I am stuck again. When I pulled the thing apart I found a 2 inch piece of 25mm rubber hose stuck between the water pump and the water intake tube, now I see why. The old water pump had a bunch of pea size gouges in the walls of the port the intake tube fits into, OK so I am thinking there was trouble getting the tube out or what I don't know. On reassambly I find that the tube just bearly touches the inside of the port when the mounting bolt is installed. I don't want to repeat the performance of the mechs that worked before me so I guess I need a new tube. Can anyone tell me where I can find a good intake tube. Quote Link to comment Share on other sites More sharing options...
archemitis Posted July 18, 2004 Share Posted July 18, 2004 junkyard, unless you want to wait to have somebody ship you one. Quote Link to comment Share on other sites More sharing options...
David C Posted July 18, 2004 Author Share Posted July 18, 2004 No Subarus in junk yards here in the land of Buicks, and Crown Victorias, That Sucks If I can find out where to get one online I would buy it today as my car is parked untill I get one. thanks Quote Link to comment Share on other sites More sharing options...
archemitis Posted July 18, 2004 Share Posted July 18, 2004 make a post at the marketplace, prolly the best way. all of the ones i have are bolted to cars =] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.