Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Hitch Wiring Question

Featured Replies

Hi,

I just intstalled a Draw-Tite Class II hitch on my car, but the instructions say nothing about how to route the wiring harness to the hitch. I am assuming that the wires don't just dangle under the rear gate, over the bumper, and out the back. Is there a way to route the wiring under the bumper to the towbar accepter? Thanks for you help.

Don't know if this is what you want, but I leave my wiring harness inside the tool tray under the floor until needed. Then I lay it out the back of the car as close to the tailgate latch as possible without danger of it getting caught in the lock assembly when closing the hatch. Its worked for me on my 97 OBW and now on my 02 OBW. Its never out in the weather longer than it needs to be. When I'm done with it, a quick wipe to clean it up if necessary and then back under the floor.

  • Author

Thanks for tip; if it has to dangle out the back, I guess the area near the hatch is the best place to send the wires.

When I wired up my legacy I cut a whole in the gromet the sits in the bottom of the spare tire carrier and ran the wires through it. Your forester my have a gromet in that area too.

  • Author
When I wired up my legacy I cut a whole in the gromet the sits in the bottom of the spare tire carrier and ran the wires through it. Your forester my have a gromet in that area too.

Thanks, I'll check it out, and post my findings for other forester owners. I have two questions: (1) Do you get any moisture in the spare tire compartment? (2)

Now that I think about it, while I was under the car installing the hitch, I did see a grommet. This may be a good option because, we travel w/ our two labs, and running the wires under the gate may pose some problems.

i haven't noticed any moisture but you could always seal the whole in the gromet with a little silicon

  • Author
i haven't noticed any moisture but you could always seal the whole in the gromet with a little silicon
Forgot to type the second question: (2) Do leave the wires mounted to the tab above the drawbar acceptor?

oh, I zip tied the plug against the cross bar, that way it dosn't flop arround.

  • Author

Say, Craig: How is that you, a 29-year-old like me will have posted his 1300th message if you respond to this question?

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.