MadMatt Posted December 28, 2004 Share Posted December 28, 2004 Got an '86 GL with the electronically controlled carb...the secondary barrel does not work when needed (under load) and does not act like it's plugged...is there a solenoid or switch that is not working on this carb? Quote Link to comment Share on other sites More sharing options...
moshem74 Posted December 28, 2004 Share Posted December 28, 2004 hi maby the vacum pipe is disconnect or maby it's a very old pipe and let some air to go out......change this pipe that connecting to the diafragma. Quote Link to comment Share on other sites More sharing options...
MadMatt Posted December 31, 2004 Author Share Posted December 31, 2004 this is a DCP306-24 carb...it has no hose connected to the vacuum actuator, it is a sealed unit bolted to the carb...vacuum is created by a spring/ball system to the diaphragm, both which are in remarkable condition...nope, vacuum lines are not the problem here. Quote Link to comment Share on other sites More sharing options...
Snowman Posted December 31, 2004 Share Posted December 31, 2004 Check the diaphragm to see if it's torn or obstucted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.