Im looking for pictures to help me model the engine/tranny setup in Solidworks3d so I can start designing a midengine 4wd subaru buggy. I took some measurements of my engine/tranny in-car but dont have a great idea what it all looks like cause its covered in sheetmetal and vacuum hoses. I've drawn up a subaru tranny but the more I look at it the more incorrect it looks. Im interested in side profile, top view, bottom, front, anything that is at a fairly straight angle. Thanks!

So what your saying is, you want pics of the engine and tranny outside of the car?

yep, should have clarified that. Sorry.

 

this is what I've done so far, and whats here will probably be different in the end, its already gone through a few different designs.

 

www.warpthree.com/milesfox/87rx/rxbuild

 

there are a few pics of an ea82 turbo in carious stages of head gasket and reseal, block, block with intake, block with intake and turbo. and pics of the individual parts themselves

http://www.themacaddress.com/news.php?nid=58215400

 

EA82 SPFI.

awesome guys, thats exactly the kinda stuff I need! I'll show you guys what I come up with:brow:

heres a pic of progress. Note the chain drive and shaft, and the new more accurate motor (the tranny is still really innacurate, still need pics of a 5spd 4wd tranny)

i got a 5mt 4wd in the attic, what measurments do you want

Measurements are not really a problem, pictures is what I'm after cause my tranny is in-car and though I have all the major measurements, the thing isnt exactly all straight lines. I need something to look at while I model it. Think you could take a side profile pic?

ill see what i can do, check back in a couple of hours