yarikoptic Posted February 27, 2005 Share Posted February 27, 2005 Hello again, Taking the advice from previous inqury http://www.ultimatesubaru.org/forum/showthread.php?t=30681 on how to deal with rusty bolts, I've got left threaded drill bits as well as extractors (having quite many rusty bolts, I've decided it might be a wise investement) -Irwin Hanson set. So now I will be able to get them off I believe but I need to get ready -- find bolts to substitute the bad ones I will take off. Can anybody advise me on the size of such on Legacy 1995 AT Wagon? May be parts numbers and I would be able to find using google...? Thank you in advance Link to comment Share on other sites More sharing options...
Legacy777 Posted February 27, 2005 Share Posted February 27, 2005 I'm not sure of the bolt thread & pitch size, but I'm sure you could call your local dealership and they could help you out. Link to comment Share on other sites More sharing options...
sea#3 Posted February 28, 2005 Share Posted February 28, 2005 The bolt size is 6mm(dia) x 1.0 mm(pitch)x 10mm (long) As far as where to buy them i would suggest the dealer, since they coudd get the right ones for that application SEA#3 Link to comment Share on other sites More sharing options...
yarikoptic Posted February 28, 2005 Author Share Posted February 28, 2005 The bolt size is 6mm(dia) x 1.0 mm(pitch)x 10mm (long)As far as where to buy them i would suggest the dealer, since they coudd get the right ones for that application SEA#3 Thank you a lot for the information! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now