Does anyone know if Part # H7010AC000 (Cruise Control) will fit in a 97 impreza? it's for a legacy..

Probabally not, but you can look at yours its under the steering wheel where the plastic cover comes off its a little box with white plug...may say CCU...are you having trouble with yours??

This is far from scientific, but here is what I know.

 

I put a subaru criuse kit on my 96 legacy brighton about a year and a half ago. I found a website that detailed the installation of a kit onto a OBS, and decided to go ahead and get it. I found a place that had the legacy kits (they are no longer made, so good luck finding one if you don't have one), but after checking, they needed not only my model, but my VIN to make sure I got the correct kit.

 

I then went to install it, and it was radically different from the webpage OBS (IIRC, a 96) install, to the tune of different actuators (the OBS was vac driven off the intake, the legacy was electrical). While this doesn't necessarily answer your question, my feeling is that no, it would not work.

 

Hope this helps.

ah, i found one on ebay. thanks for the input!

If it's a used take-off kit, make sure you get all the small pieces such as brackets, actuator cable clips etc.