Hei!

After years of faultfinding due of "check engine" on my Legacy 90 model, I

have sold it and got me a 99. mod. station wagon.

Recently it passed 100k km and suddenly the idiot lamp starts to light after

start up, but goes out after some kilometers.

I found those green and black connectors below the steering column and

reading faultcodes: 12, 22 and 54.

I belive I can not use the same translatetable I used on my 90 mod., because

the new one are using a OBD version 2.

How do I read the table "Subaru OBD2 Codes" that are presented on

http://www.troublecodes.net/Subaru/ ?

It dont "fit" my codes 12, 22 and 54 ????

 

Kindly

Svein Olav

Hei!

After years of faultfinding due of "check engine" on my Legacy 90 model, I

have sold it and got me a 99. mod. station wagon.

Recently it passed 100k km and suddenly the idiot lamp starts to light after

start up, but goes out after some kilometers.

I found those green and black connectors below the steering column and

reading faultcodes: 12, 22 and 54.

I belive I can not use the same translatetable I used on my 90 mod., because

the new one are using a OBD version 2.

How do I read the table "Subaru OBD2 Codes" that are presented on

http://www.troublecodes.net/Subaru/ ?

It dont "fit" my codes 12, 22 and 54 ????

 

Kindly

Svein Olav

 

Unless you can locate a friendly mechanic to read them for you, wyou will need a 'scanner'. here is a link to one example;

http://www.troublecodes.net/articles/equus/Equuis_OBD_II_code_reader.shtml

 

Carl