bartt Posted September 12, 2005 Share Posted September 12, 2005 Anyone know the alignment specs for a 97 Legacy outback. I need to get a ballpark to be able to drive it to the alignment shop. Really only need the Camber. Didn't change the other settings.. I just put in: new half shafts new wheel bearings new lower ball joints new struts steel braided brake lines... That weekened sucked.. BTW, if you have over 100k on your scuby, the OEM struts are toast. Get them replaced.! Quote Link to comment Share on other sites More sharing options...
nassor Posted September 13, 2005 Share Posted September 13, 2005 According to my '98 Legacy Owner's Manual, the Camber for the Outback (and SUS) should be 0 deg. 20' for front and -0 deg. 35' for rear. The Toe is listed as 0.0 (+/- 0.12 in.) front and rear for ALL Legacy models. Hope this helps. Camber specs for 1998 Legacy models: FWD Sedan and AWD Wagon: Rear:-0 deg. 55'....... Front:-0 deg. 5' FWD Wagon:...................... Rear:-0 deg. 45' .......Front:-0 deg. 5' AWD Sedan:....................... Rear:-1 deg. 00'....... Front:-0 deg. 5' Outback and SUS:............... Rear:-0 deg. 35'...... Front:+0 deg. 20' -Nassor Quote Link to comment Share on other sites More sharing options...
bartt Posted September 13, 2005 Author Share Posted September 13, 2005 Thanks very much.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.