Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Fixed Me a Turbo, Now have question

Featured Replies

I fixed up a 85 GL 4x4 Turbo Wagon. The tranny was gone and I replaced it with an 85 GL 4x4 Non turbo Wagon. Everything works so far. Here are my question?????:confused:

 

1. Heater only blows out the Middle part of Dash and nowhere else. No matter if I put it on Defrost or just Heat.

 

2. When accelerating, I notice a slight hesitation. It's more like smooth rocking then studder. When I got the car the power steering pump has spilled all over the belt, could this possible by the problem.

 

I may want to sell this car and want to make sure everything is working before I get rid of it.

 

Any help would be great

 

Vo

Heater problem- You may have inadvertantly knocked the vacuum line off for the heater controls. The flapper doors are vacuum operated.

Hesistation/stutter- See above. Could be a vacuum leak. Could be something else, too. Don't really know much about turbo systems.

I have a link to some turbo info. Have to see if I can locate it. Will edit it in if I do..........

 

Here you be... http://www.dune-buggy.com/turbo/index.htm Good reading, in my opinion...........

Tom is right on, check that you connected a vacuum line to the white cannister on the shelf behind the pass sturt tower and that the check valve (needed with turbos especially) is working.

 

The "surge" can be many things, could be as simple as a need for higher octane gas - knock sensor could be retarding/andvancing the ig timing trying to stop the pre ignition.

 

May want to fit a boost gage to watch and see if the intake manifold pressure is oscillating in time with the surge - weak waste gate spring.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.