February 10, 200620 yr I am going to get my heads decked (and a few other things) for my brat.. I am thinking .025 or should I go .020? So how much did you pay or should I expect to pay.
February 10, 200620 yr I am going to get my heads decked (and a few other things) for my brat.. I am thinking .025 or should I go .020?So how much did you pay or should I expect to pay. I suggest http://ramengines.com/ to do the machine work they speacialize in suburus.Email ron and he will give you a quick answer on anything you throw at him.
February 10, 200620 yr $40 per head for milling. if you're talking complete valve job, pressure tested and milled, about $150. add $25 - $40 for any cracks between valves seats that may need repaired. i would consider these on the high end of prices since prices are higher around where i live. you can get a few bucks lower in more rural areas.
February 10, 200620 yr Author Thanks:banana: Oh one more thing my brat only has 60k on it (thanks Mic) do you really think I should get a valve job?
February 10, 200620 yr You may as well get the valves/seats re faced since you've got the heads off. I very much doubt you'll need new guides (best to check though), so just do the re facing and valve seals. Shouldn't cost much at all.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now