March 4, 200620 yr What's the procedure for bench testing the EA82T TPS? Like resistance values. Section 2-7 of the online manual http://www.finleyweb.net/default.asp?id=142
March 4, 200620 yr Author THAT IS AWESOME! I have looked for an online manual for too long to admit! Thanks:headbang:
March 4, 200620 yr THAT IS AWESOME!I have looked for an online manual for too long to admit! Thanks:headbang: Have fun getting the TPS off. It is held on by two little screws, be careful not to drop them. I had to move the alternator and the AC compressor out of the way to get at the bottom screw. If I had a stubby small philips or an offset small philips, I might have been able to remove w/o the trouble. Not hard, just a pain. My Loyale has the alternator close to the TB, and the AC compressor toward the battery. If you have the opposite setup as mine, as some I've seen, where the AC compressor is on the TB side, harder to get at the TPS.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now