Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

dash lights inop, no tail lights, left headlight dim 1991 loyale

Featured Replies

hey guys, its "my subaru is stuck in 4wd" guy. so i figured out what was wrong with the 4wd, its all set, but i noticed toniight that i have no dash lights,license plate lights, tail lights and my left headlight is dim, i checked the fuse for the tail/plate lights. stop lamps are fine, i pulled the harness out for the rear tail lights, they are on, but dim, i think i might have a bad ground, somewhere, just wondering if anyone could offer some advice. maybe this has happened to someone else? i need to drive this thing at night! no dash lights sucks, but no tail lights is the worst.

I just gotta do this!

 

check the grounds! :horse:

 

with a dvm set on 20v, connect one lead to center terminal and one lead to outer terminal and note reading ~12 = good

 

then connect one lead to center terminal and one lead to good ground and note reading ~12 = good

 

then connect one lead to outer terminal and one lead to good ground and note reading ~0 = good

 

then stick one lead in engine coolant and one lead to good ground and note reading ~0 = good

  • Author

right, i was gonna do that, but seeing as the lights didnt work, i took my other car to work, and while i was at work, it rained like crazy here, now i have crank but no start, now i have to start from there, atleast it used to move before the rain...i hate this car right now!

 

 

I just gotta do this!

 

check the grounds! :horse:

 

with a dvm set on 20v, connect one lead to center terminal and one lead to outer terminal and note reading ~12 = good

 

then connect one lead to center terminal and one lead to good ground and note reading ~12 = good

 

then connect one lead to outer terminal and one lead to good ground and note reading ~0 = good

 

then stick one lead in engine coolant and one lead to good ground and note reading ~0 = good

  • Author
right, i was gonna do that, but seeing as the lights didnt work, i took my other car to work, and while i was at work, it rained like crazy here, now i have crank but no start, now i have to start from there, atleast it used to move before the rain...i hate this car right now! .
i dont think im getting spark because i disconnected the main coil wire and noticed no change whatsoever, maybe the lights are grounded through the coil? im lost! and upset, i thought maybe the rain had gotten into the distributor cap.. please let me know if you have a clue about what is wrong..

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.