Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

need help getting engine codes. can't find conectors.

Featured Replies

I have an 87 GL-10 turbo, automatic 4WD. Yesterday while driving the car the check engine light came on, it used to do this before and go on and off so I never really botherd.

 

Well It is now on and sometimes when I am of the gas and coasting, or when I am at a low rpm while driveing I can hear a knocking soung. It used to do this before also when the CEL used to blink on and off while driveing but would go away, It still does it but more than before. Didn't do it when driveing home from work tonight but it did this morning.

 

So I have the problem of finding the diognostics connectors, I have read that they are white and green and under the hood by the wiper motor, well I have four plugs and none of which they seem to go into.

 

I have two rectangle ones brown, and other black.

 

The others are white round, and black round. not one gan plug into eachother. So a picture will help:confused:

 

I now the led is under thedash but I just cant find the plugs. So can I please get help and please don't give me crap on searching, I have looked and not found much to my advantage, I just have to fix the car becasue I drive it everday and am really dependant on it. Thanks

on mine they were under the dash, near the ecu mounted under the steering column

 

there should be a bright green male and female spade and a black male and female spade

 

the green ones should be easy enough to find and the other will be right next to it

 

good luck!

 

*edit - should all be single wire plugs

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.