In my quest to make the Brat look like the remains of ww III. I figured I would start this thread and updated it as I get things done.

part 1

Rust proofing and hole pluging.

Rust proofing with this

http://rustbullet.com/Products/Automotive/Automotive.htm

nice stuff it is a brushable powder coating. 1 Gallon covers 200sq ft

hole filling with this

http://www.por15.com/PRODUCTS/PUTTYFILLERSSEALERS/EPOXYPUTTY/tabid/87/Default.aspx

This stuff has some wicked tensil strength you can even tap it and put screws in it.

Then I will cover it with this

http://www.cabelas.com/cabelas/en/templates/links/link.jsp?id=0021475016662a&type=product&cmCat=search&returnPage=search-results1.jsp&QueryText=tuff+coat&N=4887&Ntk=Products&Ntx=mode+matchall&Nty=1&Ntt=tuff+coat&noImage=0

 

I will be trimming fenders and putting on flares.

More to come.

 

---pics below--

 

I still have one more coat of rust bullet to put on this spot. It has to be 3 mils thick . I only bought the sampler kit The one gallon pail is in the mail.

seems to me that remains from wwII WOULD have rust, holes and look like its falling apart.

 

mad max rigs would too. i doubt POR15 would be available at the thunderdome supermall.

first, put a eaton M62 on top of your motor

then, make new fenders, one out of metal roofing and one out of a chevy corsica fender

14 bolt dually rear axle with the dually wheels, mismatched tires of course

dash mounted elephant rifle(no windshield)

bed mounted M60

I am thinking more along the lines of one of the chase cars. Now if I can only get master blaster to sit in the back.. Oh well back to work.