What kind of seal puller/method do ya'll use to pull the cam and crank seals? Pictures and links would be appreciated. I've never pulled a seal before; I have a Lisle seal puller, but it seems like it's kind of big for this job (maybe more suitable for wheel bearing seals er somethin). -Louis

<<What kind of seal puller/method do ya'll use to pull the cam and crank seals? >>

 

very small flat head screwdriver. tap it into the seal or between the seal and housing. be sure not to scratch the metal.

Thanks for the info! Hm...simple, cheap, I'll give it a go

another way is to drill a tiny hole in the face of the seal and use a self tapping sheet metal screw. screw the screw into the hole and use a hammer or pliars to pull. don't get anything near the machined sealing surfaces. don't want to scratch those.

I used this one, http://www.sears.com/sr/javasr/product.do?pid=00947091000

It's the ultimate bent screwdriver.