doe anyone know any websites that give you instructions on how to replace the speakers in a 1997 legacy gt? thanks for your help

doe anyone know any websites that give you instructions on how to replace the speakers in a 1997 legacy gt? thanks for your help

 

It's generally pretty easy. Pull the panels covering the speakers, unbolt the old ones, bolt the new ones in, and wire them up.

doe anyone know any websites that give you instructions on how to replace the speakers in a 1997 legacy gt? thanks for your help

 

wagon or sedan? i thought sedans were mounted under the rear deck in the trunk.

This may help. If I did this right!

~Mark

1stGenCrutchfieldMastersheet-Official.pdf

doe anyone know any websites that give you instructions on how to replace the speakers in a 1997 legacy gt? thanks for your help

 

There was an 8 page thread here with detailed instructions and lots of feedback on speakers and vendors. But you can only search a year bak, so it maty be gone. I bought speakers from another site that was 30% less than Crutchfield - who gave me bad advice.

 

If you have speakers in the rear doors, there is a plastic shield over top. If you cut the lip of the shield off, almost any speaker will fit.

 

I replaced the fronts with speakers with built-in tweeters and disconnected the ones by the mirrors (if you have them).

 

I bought a double DIN AM/FM/WB/CD/Cassette unit from a newer Subaru on eBay, brand new $160. Plenty are being yanked out of WRX's so you can get them even less as takeouts.

Generally, up front you might need spacers to fit an aftermarket speaker with a larger magnet.