Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help ID'ing a part

Featured Replies

I just bought some gently used engine and tranny mounts from a WRX for my 98 Legacy (decided that Group N mounts were overkill, and these were very cheap).

 

I've got 2 mounts, 2 mounting plates, and a transmission mount. But in the box is an L-shaped bracket that I'm not familiar with. The guy I bought them from doesn't know either--the previous owner of his car already swapped out the mounts with aftermarket ones and left these in the trunk. I haven't taken my own mounts apart yet so I guess it might be something I haven't seen yet, but it's a bit odd that there's only 1. Does it go with the tranny? Is it just a stray part?

mountco3.th.jpg

(click for big image)

My guess is that it was a shim for the old motor mount that the other owner put back in the box when he finished the last job. I have never replaced a motor mount so I dont know, but I have replaced transmission mount and dont remember seeing anything like that.

I just bought some gently used engine and tranny mounts from a WRX for my 98 Legacy (decided that Group N mounts were overkill, and these were very cheap).

 

I've got 2 mounts, 2 mounting plates, and a transmission mount. But in the box is an L-shaped bracket that I'm not familiar with. The guy I bought them from doesn't know either--the previous owner of his car already swapped out the mounts with aftermarket ones and left these in the trunk. I haven't taken my own mounts apart yet so I guess it might be something I haven't seen yet, but it's a bit odd that there's only 1. Does it go with the tranny? Is it just a stray part?

mountco3.th.jpg

(click for big image)

It is a heat sheild on the right side motor mount (only turbo models). It is placed on the bottom side of the mount , between the mount and the subframe

 

SEA#3

  • Author
It is a heat sheild on the right side motor mount (only turbo models). It is placed on the bottom side of the mount , between the mount and the subframe

 

SEA#3

Thanks, that seems right- it fits neatly on the bottom of the mount. Sadly my Legacy lacks a turbo. Does the exhaust on an N/A 2.2 come close enough to either of the mounts to merit using it, or should I toss it in the junk drawer?

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.