rlhodges1 Posted July 3, 2007 Share Posted July 3, 2007 would someone please advise me of a method to install the short rubber hose between turbo and engine block. thank youi:Flame: Link to comment Share on other sites More sharing options...
Turbone Posted July 3, 2007 Share Posted July 3, 2007 Ewww, you picked a good one:-p Remove all the heat shields, if you can. Remove the downpipe, then you should be able to access the line. Link to comment Share on other sites More sharing options...
Gloyale Posted July 4, 2007 Share Posted July 4, 2007 unbolt the turbo from it's flanges. lift it up and put the new hose on the turbo. Then guide the hose onto the tube on the block as you lower the turbo. All heat sheilds must be removed and it takes tricky clamp work. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now