i could use all the advise i can get.

K here goes, i just bought a 1991 subaru justy, i have replaced the following

distributor and rotor

wires and plugs

fuel filter

fuses

oil and filter

valve cover gasket

now the only issue i have with this car is at a certian point while accelerating it loses power and starts to buck and jerk, if you reposition the throttle it sometimes stopps, or kick it down and wind out the gears like a VW.

now it doesnt do this when its cold.

My thoughts is the throtle body and if it is what parts inside would i need to address.

this is a 91 justy 4wd FI 1.2

any advise would be appreciated and thanks for looking!

While there are Justy people here, I'd recommend you join this board:

http://subarujusty.proboards20.com/index.cgi

 

Good luck.

cool and thanks!

clean the throttle body and MAF sensor

Ive used CRC cleaner before on my toyota's MAF, cleaned the snot out of it.