Does anyone have the crucial measurements of an EG33? For fitment purposes (possibly going into my Outback), I'd like to get the measurements (every aspect possible).

 

If anyone has experience swapping one of these motors into ANYTHING, I'd love to hear from you.

 

Also, what are the measurements of my EJ25?

it'll fit. you'll want to replace everything you can while it's out - valve cover gaskets, timing belt, water pump, pulleys, etc. huck has one in his XT6. i'm sure with some searcing you'll find them in EJ's as well, have you tried a google or yahoo search?

I'm working on it...still, has anyone measured it out?

Front of crank pulley to back = 24"

Side to side, about the same as an EJ22 = 32"

 

Emily

http://www.ccrengines.com

Lemmie know if you need any pics or anything, as I have a 92 SVX.

 

Also, while it's out, do the plugs, they are a PAIN when the motor is in an SVX, I can't imagine how much fun they are in something with even less room in the engine bay... (My recommendation is OEM Iridium plugs, they're kinda spendy, but it's worth it not having to mess with your plugs for 90,000 miles...

I was contemplating the same setup for my 96 OB

For the newer gen cars, look into getting an EZ30, (or an EZ36 if you are lucky), they're about the same HP output as the EG33, but they are lighter, and smaller (only 0.8" longer than an EJ25) They aren't as bad rump roast as the EG33 though (Although they don't involve hacking up an SVX :-()