ezapar Posted April 18, 2008 Share Posted April 18, 2008 So. I'm keeping the 4X140. What's involved in swapping in an ej trans? Can I just swap cups, or do I have to cut an dsplice two axles together? Thanks. Link to comment Share on other sites More sharing options...
s'ko Posted April 18, 2008 Share Posted April 18, 2008 So. I'm keeping the 4X140. What's involved in swapping in an ej trans? Can I just swap cups, or do I have to cut an dsplice two axles together? Thanks. The EJ trannys have 25 spline stub axles in the front. If an EA82 25 spline cup can fit in an EA81 23 spline DOJ joint then it will work or you might be able to use an EA82 axle outright if it isn't too long. Link to comment Share on other sites More sharing options...
GLCraig Posted April 23, 2008 Share Posted April 23, 2008 You're probably will want to use axles from a EA82 with a 25 spline DOJ. They may need to be shortened to fit, but they'll handle the EJ power and big tires a lot better. You might consider using EA82 front knuckles and brakes too. Link to comment Share on other sites More sharing options...
GLCraig Posted April 23, 2008 Share Posted April 23, 2008 Another option would be to weld the center diff, and do a T-case mod. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now