djbroadus Posted July 8, 2008 Share Posted July 8, 2008 Or where to get one, i noticed this last weekend sheered off support rod. An I am assuming its not the best thing to be broken. Any help would be stupendous. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 9, 2008 Share Posted July 9, 2008 That's the "pitching stopper". Get a die and run the threads down farther on the rod, then cut it in the middle and weld a section of a bolt into it to extend it. Or make a new one from some flat bar - I would turn the mounting hole 90 degrees and make a new "rod" from a couple lengths of flat bar in a T arrangement for strength. GD Quote Link to comment Share on other sites More sharing options...
djbroadus Posted July 9, 2008 Author Share Posted July 9, 2008 ok then pitching stopper, alright i'll see if i can fancy something up. not much of a welder though Quote Link to comment Share on other sites More sharing options...
McDave Posted July 9, 2008 Share Posted July 9, 2008 ok then pitching stopper, alright i'll see if i can fancy something up. not much of a welder though Or you could find one in a junk yard. Quote Link to comment Share on other sites More sharing options...
djbroadus Posted August 7, 2008 Author Share Posted August 7, 2008 finded one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.