dave833 Posted February 1, 2009 Share Posted February 1, 2009 OK- I'm pretty sure I know the answer to this question, but I'm getting ready to pull an EJ22 from a '97 Impreza (built 6/96) w/auto trans. to put in a '97 2.5GT Legacy Wagon 5 speed. Can someone verify that it doesn't matter that it's coming out of an Impreza instead of a Legacy? Are there any other parts I'll need to swap? Thanks. Quote Link to comment Share on other sites More sharing options...
Snowman Posted February 1, 2009 Share Posted February 1, 2009 It should be the same basic EJ22 used in the legacy for many years. The only difference I know of is that the impreza may have single port exhaust instead of dual port like your EJ25 has, so grab the Y-pipe from the impreza as well. Quote Link to comment Share on other sites More sharing options...
davebugs Posted February 1, 2009 Share Posted February 1, 2009 It'll work. You'll need the flywheel from 2.5. Maybe have to mess with charcoal canister lines - I forget. But if you do it's not bad. You won't have the PS line bracket as stated here - no biggie. You will need the Ypipe off the 2.2 Search around here. Very common swap. Legacy/Impreza doesn't seem to matter. For a while the JY's around here charged Less for Impreza's so that's what I used. Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.