hey so i have my engine in 1990 legacy 2.2 its in a 1989 coupe and my harness is a direct copy of one bratsrus1 has that was made by ShawnW. i have my harness hooked up and i can crank my engine it gets fuel and the injectors ar clicking (also tested with a light) but im not getting any spark i tested all 3 wires going to the coil and none have any juice not with the key on or cranking. i replaced the coil pack the crank angle senser and the igniter and still nothing the ECU threw a mad AFM code but i replaced that and now ther are no codes so if anyone who has done the 2.2 conversion coulde give me some help it would be AWSOME to get this puppy running thanks again Rob.

yellow wire, center pin of the coil, should get 12v+ while ign is on.

what about a siginal from the crank angle sensor