efseiler Posted June 11, 2009 Share Posted June 11, 2009 Hi, I have a 1996 Legacy Outback. I recently got rotors and pads replaced on all four wheels. After a few hundred miles of driving I noticed that on the passenger side of the vehicle the rotors are substantially less worn (the scoring is still fairly noticable whereas on the driver side it is definitely gone). There's a new (well, rebuilt) caliper on the front and my mechanic swears that the rear one is still OK. Could the hydraulics on the driver's side be somehow less effective/ineffective or might the discrepancy be due to a weight distribution issue (it's an automatic). Thanks for your help/insight, Damien Link to comment Share on other sites More sharing options...
nipper Posted June 11, 2009 Share Posted June 11, 2009 You have a seized caliper. Take it back. Show your mechanic the issue. Everyone is human and allowed to make mistakes, as long as they fix them. nipper Link to comment Share on other sites More sharing options...
efseiler Posted June 11, 2009 Author Share Posted June 11, 2009 how about bleeding them? (the brakes, I mean) :-D Link to comment Share on other sites More sharing options...
nipper Posted June 11, 2009 Share Posted June 11, 2009 You can always bleed them if you wish, but a seized caliper will do what your saying, and give you a goofy brake pedal. It also will cause the ABS to over-react since it is trying to balance out the braking forces. nipper Link to comment Share on other sites More sharing options...
efseiler Posted June 11, 2009 Author Share Posted June 11, 2009 ok...but would bleeding air out of the system increase the effectiveness...what is the main reason for bleeding air of the system? How about the front caliper? Could it be also bad (it's rebuilt straight from the box)? --Damien Link to comment Share on other sites More sharing options...
efseiler Posted June 11, 2009 Author Share Posted June 11, 2009 is it possible to have a partially functioning/ intermittently working caliper or is it mostly works/don't? --Damien Link to comment Share on other sites More sharing options...
nipper Posted June 11, 2009 Share Posted June 11, 2009 Its like anything else that starts seizing failing. Sometimes it works some times it doesnt, untill it wont anymore. Could be as simple as just needing the slide pins cleaned and lubricated. nipper Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now