bgambino Posted October 9, 2015 Share Posted October 9, 2015 I needed a new fob for my 06 forester The buttons on these are spongy....I don't' like them Ebay is like $50...I hate to spend that much I have 2 fobs for an 05GT Anyone know if they might work? I would keep them rather than sell them with the GT if they work Went to cars101 but it does not say Quote Link to comment Share on other sites More sharing options...
forester2002s Posted October 9, 2015 Share Posted October 9, 2015 If you have the fobs, why not just try to reprogram them? cars101.com will tell you how to do this. Quote Link to comment Share on other sites More sharing options...
johnceggleston Posted October 9, 2015 Share Posted October 9, 2015 (edited) there is also a great post on how to clean the fob buttons . it has a good write up and great pics. basically, remove the circuit board, soak it in some thing, rinse it in something, let it dry. it makes the buttons work better, does not hurt the electronics, and is cheaper than replacement. maybe search ''clean keyfob'' or "clean key* fob*" or clean remote, you get the idea. as mentioned , if the 06 and 05 fobs look alike, you can interchange them and program to your new ride. or have them work both. (some times complicated, but maybe better than carrying 2 fobs.) if they do not look the same, they may not swap. Edited October 9, 2015 by johnceggleston Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.