Jump to content
Ultimate Subaru Message Board

P0301/0302, cruise/CEL flashing


Recommended Posts

I had the head gaskets done on my 09 Impreza. Car runs great but if I floor the gas to get on a highway, the CEL/cruise/traction lights flash and a 0301/0302 code is set. I know this indicates 1&2 misfiring, but i can't feel it. Codes were cleared and stayed off until next foot-to-floor moment. NGK plugs are new. Scratching my head!

Link to comment
Share on other sites

If you had the hgs done by a shop. You should be bring it back to them having them look at it.

Because (at least at my shop) when we do HGs we use new plugs and wires etc.

So if there's a misfire that only started happening soon after the job. It's likely related.

 

If you did it yourself. Then swap the plugs and or coils. See if it moves. If not, you'll need to be checking fuel, timing etc.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...