Leaderboard

I didn’t like where the friction point was in the pedal travel, adjusted the cable then the pedal went hard before it hit the floor. That’s when I found out the fork maxing out on the case hole. Of course it meant the gearbox came out again. And the two washers were guess work. Which ever fork is used, it will dictate which pivot point to use since the two forks are different. Just sit the fork in there with the TOB and see where the fitment for the pivot lines up Cheers Bennie

96 will be cable. 02 will be hydraulic. You probably want to use the 02 fork. You may or may not have to move the fork pivot ball location. I can't recall. GD