labatt13

Yup look like a tan vyal with some cracking on mine. I am really surprised how much has stayed the same now looking over the GL. As my 93 Impreza is very similar. Seat rails,door sills,headliner,etc

yeah I think I will do that unless I see more. These upholstery shops charge a fortune I think I will just have my wife or mom sew over exsistin material. No paterns needed than heh. Now what do they use fishing line?

Ah cool. I remember my wife and I were surprised to see it. I think it was on some car show friday deal at the bowling alley and it was the only car we took a picture of Just can't find the picture now heh.

I would like to start going over the car and getting it ready for fall/winter. It may sound early but everything costs money ya know. Anyway I would like to hear from you guys what things you have done to your car that helps you in cold months. Permanent installs or just seasonal ones. Also do you have problems with your rear defrost lines? I don't even have a rear window yet so it's a concern. Also every year my rear and quarter windows fog up beyond belief in my impreza. This year I would really like a kit to add defrost lines or buy one of those JCwhitney blowers (for my 82 GL). Is there a defrost line kit available? Does your heater keep all your windows defrosted/defogged? I really like to see when I am driving like an idiot in the snow Next I was interested in a heated washer fluid kit but @ 130 I will pass. Is there a cheap one? Or can I go buy some heater element that is sealed and drop it in with switch control? http://www.nightdrivingsystems.com/index.cfm?action=viewitem&itemid=6&siteid=2&basketid=&catid=17&subcatid=31&oldaction=catalog Again heated wipers I think only run an element through the main metal so there won't b ice/snow build up. Is there anyone who is familar with heating elements to suggest an easy approach of building a DIY kit? http://www.nightdrivingsystems.com/index.cfm?action=viewitem&itemid=31&siteid=2&basketid=&catid=16&subcatid=23&oldaction=catalog Also does tempature change air pressure? Thanks again for any and all help!

I think I saw it in the gallery but unsure who's it is. I am just curious cause I think it had Wa plates maybe Co? Anyway I spotted in Michigan when I was last there parked at a bowling alley. This was maybe last summer? I think it had a decal to a subaru website forget if it was this website or another. Thank it was this one? http://usmb.net/gallery/album189/DSCN2851?full=1 Just curious.

Ok I set up a caepress site earlier this eve and I wanted to make a few items in relation. However I just can't get it right so I was wondering if anyone on here could help design a simple sticker or two. Maybe Tshirts? All profits made from the sticker could be donated to this site or I can just set it so everyone pays at cost. I just want the stickers made. My Sister's a Brat and/or My Brother's a Brat Also is there a USMB sticker? If not would the board owners allow some to be made? The graphic needs to be made in a 2100 height by 700 with template. When I tried this in photo shop with max size font the font still showed to small. I could do it at a smaller size and increase but i just wasn't getting the right combination of font and colors. Anyway if you guys think these would be cool stickers and a good idea with the donations please post.

Sept 30th http://www.ner.org/Rally/roadrally/06/06CCR_flyer.pdf Litchfield Hills, Ct Both Trap and Tour type Rally ph. 860.648.0205 mziburis@cox.net I am not sure if every state is the same but when I was in Michigan they had a class for everyone. Team with computer Team Without computer as the requirements only show need of stop watch. further reading if interested: General FAQ on TSD/Road Rally http://ascc.ca/index.php?name=Content&pa=showpage&pid=27 SCCA's page on Road Rally/TSD http://www.scca.com/Rally/RoadRally.asp?IdS=032678-33EC9B0&x=040|045&~=

hahaha thanks subeman! I was thinking the other day I saw a TSD rally coming up. I have only done like two of these back in Michigan and were kind of fun at least there. Since they used all backroads none which were speed marked but I imagine there still is some sort of law. However with TSD you never break 50-60 unless you get really backed up. Well I figured if you guys want to go I can get details listed of the next closest one. YOuw ill need a navigator. depending on how many are interested some of us can team up with others on here that will need a navigator. I will go find the detail now and post. Oh and BTW I have yet to see any rallycross, do you guys know of any?

Thanks for all the info. The other day I saw some site selling adapters for the currenttrans to an EJ series motor. Has anyone dropped an EJ in an EA body as of yet? I assume the pipig would be an issue if I started to dream about a legacy turbo I think was out in 90-92 year range? Is the size of a 2.5 much larger than a 2.2? Also Is the EA82 trans a better choice for a more powerful engine? Will the EA82 trans require a different drive shaft? I am guessing the trans from an EJ series is to large and would require a shortend drive shaft? Now back to the 2.2 would it kill either trans EA81 or EA82? I am not sure the HP/Torq but guessing 120-130 range? Also what is the weight of the EA81 hatch? I would imagine the hatch with a 2.2/2.5 would really pull.

I got look closer once it gets light out. No I wasn't thinking anything fancy I was thinking of that cheap nylon like fabric that is ultra thin and always hangs down in early american cars. Maybe mine has the vynal missing. Has the vynal ver had problems of coming apart from the foam? Assuming it is attached via adhesive? Thanks for the reply.

lol lumberjack plaid. I tell everyone since I got the car its the Burberry edition lol! http://www.glasgowsurvival.co.uk/pictures/burbMobile.jpg I only worry about the backseat. Fiding a decent replacement. Most upholstery places charge a fortune to do work so that will be my last resort unless I do some heavy shopping around.

Where are you gonna install the unit? I am getting one as well. I always think these would be good for group meets,group drives,TSD rallies,etc. I always hear people having them so I finally got one. My only problem is where to install it! I was debating on which car to put all the equipment in and I think I am going toward the GL at the moment since it will be the winter ride until its ready for ful time. Anyway I will post some pics of it and maybe start another thread on where to install radio equipment. I was a trunkable scanner as well for entertainment value. Also is there a subtle CB antenna? Mentions above was a cobra cellphone styled antenna, would you have a link to that product? The radio I have I believe is 12 Watts what is a good size antenna for that wattage?

Now what about that in reverse using an EJ motor in an EA chasis? Would love a legacy turbo 2.0 with this trans assuming the trans could be beefed up.

thanks searching now I wonder if this pod would fit with some trimming:

I am curious how you guys have addressed your headliner issues? It looks as if there is none in my car only the foam. So I am guessing what was once there was that cloth on foam that sags? If thats the case have you replaced the cloth or used dye on the foam? Is there a really good adhesive? Thanks, John

So how about I got a complete e82 turbo wagon or the like would this be the best way to do the swap? Would I still need to fab anything? Or would the donar car have everything? For the dash I wanted was from a 84 GL Sedan. This would fit right? As I am getting familar with all the years and parts available given a particular year I thin keverything I waant is from an 84 well I guess the turbo is any e82 turbo and I would do the trans as well. I figure I would keep it stock. I was thinking on going after a grey interior which I knew 84 GL sedans had but I guess sedan door paels would not match so I think I will just try to source the damaged interior parts and stick with the same color. I have a tan plaid but the vynal seems to have dried than cracked real bad. Is this very common? Should I try to source old seats or just have them redone?

Well the breaker bar wasn't too big (YIKES). My next question is there a cheap attachment I cant buy versus that full on kit I pictured in my above post? In your link it shows making one but I don't have a table clamp so am unsure of going at it with grinder and a big wrench to hold the socket end. Thansk again for all the help

My GL has the plaid seats in them I was wondering if its possible to get replacement covers for them? Or a place to find these that are not damaged vynal like mine. If you see the tops of my rear seat is all cracked and ripped open or what do you think would be the best way to fix this fo rthe rears? I was thinking cutting equal parts out of each side and putting something under? I imagine I could not find eaxt matched vynal so....?

Still waiting reply will post once I know. Again if anyone knows material/weight/cost please post.

A few topics on lights in one thread: Years ago I had an old BMW 320i and subscribed to a mag called European Car. One of the issues had a lighting comparison guide of all driving and fog lights. Well all major lamps on the market at that time. Well I was wondering if any of you have seen anything like this? I have been looking at the high dollar lamps and if I ever fork out the money for a pair I want the absolute best. CHEAP METHOD? Now if I go cheap what would you suggest? I was looking at generics on ebay and medium priced items like KC lites, etc. Any size suggestion? I have a push bar/light bar on my GL and I think I could fit 4 lampos side by side but would it help much more than two? Placement: Like i said I have a light bar, but I was very interested in possible placement near the sideview mirrors. I saw it on the old GL rally car up to safarai impreza. I never thought about it but I think it would light up a very good area. Anyway I forgot what I read on install instructions time and time again about x inches from ground etc but I want the most effective for dirt road/back road high speed. So suggestions please. YELLOW: I have used Hella Yellow Stars for years. I think they are terrible LOL but in the rain and snow I like think they help. I have a very difficult time in the rain when driving on tar versus cement mixture roads and the standard white light just doesn't cut it. I was curious to know experiences of using yellow bulbs,films in both headlights and fogs/driving. Anything else in relation feel free to blab away

Ah beautiful! Thanks so much. So let me get this right they can not be compressed in like other cars? They have to be screwed back in correct? If so I hope I didn't hurt anything as I was trying to use a c-clamp on them like how I do them on my Impreza L. Yikes!

In regards to the 82 GL I picked up.. The brakes are real bad so I started with doing the front pads. The front caliper didn't want to go in real easy so I stopped. On the rear of the caliper is a rubber boat covering I don't know what. Well I was concerned on using the C Clamp to ocmpress the piston because of this rubber boot. How have you guys done this? Also those caliper tools you can rent do they work on a different basis? Or more so attach to different points to compress the piston? tool ref. http://www.thepartsbin.com/cartools/automotive_service-brake_caliper_tool_kit-d.html In the link it says it will rotate the picton back in? Is that possible? EDIT: Also is there a way of puttting any disc brakes on the rear? Or am I dreaming?

I have an 82 GL now and was curious what our half shafts interchange with? For example I see a brat half shaft 82-87 listed on ebay but lists nothing on other models. And there is a bunch more for othe rear GL models. example http://cgi.ebay.com/ebaymotors/CV-AXLE-SUBARU-BRAT_W0QQcmdZViewItemQQcategoryZ33729QQihZ003QQitemZ130002132818QQrdZ1QQsspagenameZWD1V Thanks for all the help.

Thanks would you happen to have the phone number there? Does he carry a lot of old cars or just subarus? Also any idea how his prices are? Thanks

I was looking at a seat thread and saw a pic of door panels from an 86 GL wagon. Would these fit an 82 GL hatch? Any idea if they would be very difficult to source?