applewoodfurn

ebay has a lot of stuff, a lot of time spent and no "kits"

yes i do, email; risk1@tds.net it is out of a 80 but should be the same

Thanks Paul, got mine in great shape on 11/6/12; applewoodfurn

I made my own adapter for a 30 over 1.6, could not get one faster than i could make it, works great.

applewoodfurn is inked onto the check at the top and center the McMvinnville address is for shipping, Risk are my initials, apiece of paper was included with all needed contact info, sorry for the delay as the "V Bulletin" was being a bully to me for a bit. computers are not my friends as per why Weber. Any more info needed will be gladly given, and again thank you senior members for this type of extra effort.

Will take three and have a check in the mail as soon as i know who where how much. reply to risk@tds .net Thank you

1980 gl 5 door ea81 [mod] 4w 4s. The external to internal vr [mod] was done prior to my having purchased the car. Now that i have done the 86 max [mod] a gremlin has arizzzzen. i have had the car for about three years without any dead bat problems until now. purchased a new 86 max alt and to make it all tidy, a new L,S plug. i think and ive checked several times that all the instructions were followed. The S side of the plug now has bat voltage all the time even with the key off and out. Um that drains the bat over night. Take the plug out, no bat drain. i have the 80 1600, 1800 service manual, nice, in the wire diagram the yellow S goes to the white on the 7 pin terminal where the old ex vr was. the book shows this wire going to the bat thru the now replaced fusible links. My question is not just how to fix this, but after 3+ years? and all i did was put in another, higher amp out, alt did this gremlin come out of its hole and now drain the bat of all its blood, yes i had to add water. i have another 80 30 over ea71 5s 2w i would like to put this alt mod into, but would like to do it correctly, thanks much for any good advice, and yes this is my first post as iv always been able to find the answer. i like this USMB