Jump to content
Ultimate Subaru Message Board

SubiePimp

Members
 View Profile  See their activity

  • Posts

    22

  • Joined

  • Last visited

 Content Type 

Everything posted by SubiePimp

  1. SubiePimp
    OK I HAVE A 92 LOYALE WAGON 4WD AND WAS JUST CURIOUS ON WHAT A GOOD PRICED AND GOOD PERFORMACE SHOCK WOULD BE FOR MY CAR. I HAVE ALREADY ORDERED THE KING SPRINGS FROM PRIMITIVE RACING AND I AM JUST LOOKING FOR SOMETHING THAT GIVES A GOOD RIDE AND WILL HOLD UP ON A LIL BIT OF OFFR-OADING. I HAVE BEEN LOOKING AT KYB SETUPS FOR SHOCKS AND STRUT ASSEMBLIES, THERE ABOUT 50-80 BUCKS PER WHEEL. BUT I WANTED TO SEE IF ANYBODY ELSE HAS HAD SOME EXPERINCE WITH A GOOD SHOCK SETUP. I HAVE NEVER REALLY DONE SHOCKS BUT UNDERSTAND HOW THEY WORK AND HOW TO INSTALL. ANYWAYS ANY GOOD HELP IS APPRECIATED....THANX Eric W.:banana::banana:
  2. SubiePimp
    ONE OTHER QUESTION I HAD WAS ONCE I GET THE RADIATOR IN AND INLETS BRAZED ON IS THERE A SPECIFIC TYPE OF RADIATOR FAN THAT PEOPLE HAVE BEEN USING FOR LOYALE'S. I HAVE THE A.C. PULLED AND HAVE THE SPACE TO MOUNT THEM BUT JUST CURIOUS IF ANYBODY HAS ANY SUGGESTIONS. THANX AGIAN Eric W.
  3. SubiePimp
    OK SO I HAVE A 2.5L THATS GOING INTO MY 92 LOYALE I HAVE IT ALL READY TO GO WITH SJR ADAPTER KIT , XT6 CLUTCH KIT , PERRRIN LWCP, ETC, BUT BEFORE I PUT IN THE ENGINE I WANT TO SEE WHAT OPTIONS I HAVE FOR A RAIDIATOR FOR MY 92 LOYALE. SCOTT FROM SJR LIFT HAD MENTIONED TO ME THAT I WOULD NEED A DUAL CORE RADIATOR FROM AN EA82 TURBO MODEL. I WAS JUST CURIOUS IF THERE WAS ANY SPECIFIC YEAR, MAKE, OR MODEL THAT WOULD JUST SWAP OUT WITH THE SINGLE CORE STOCK LOYALE RADIATIOR THATS IN THERE. I WANT TO MAKE THIS AS EASY AS POSSIBLE FOR FITTAMENT. ONCE I GET THE RIGHT RADIATOR I GOING TO HAVE EJ INLETS BRAZED ONTO IT:grin: THANX GUYS AND GIRLS AND LETS MAKE THIS A USMB EFFORT.......... PEACE.......... ERIC W. :dead::dead::dead:
  4. SubiePimp
    ill keep everybody updated as i get the clutch kit and as i drop the engine into the loyale. until then Peace
  5. SubiePimp
    a few more pics :slobber::slobber:
  6. SubiePimp
    here is the engine bay after i pulled the 1.8l out and degreased the engine bay. it turned out pretty good looks really clean. the only other thing i will do before the engine goes in is that i will replace the c.v. axles. they were on the car when i got it and the boots look craked and one is ripped on the pass side. 130.00 for replacements A1 Cardone from summit racing. should be a good investment.
  7. SubiePimp
    ok so here is the car. i have the front end pretty much torn down and the fenders off. The loyale is in great shape everything worked when i pull the 1.8l out and the interior is in prestine condition:grin::grin:
  8. SubiePimp
    Orderd a 1990 Subaru XT6 CLUTCH KIT from Parts train today 235.00 bucks but the xt6 clutch has greater claming force wich will work better for my ea to ej swap. not really many other options out there for a ea 82 drivetrain. when it shows up ill update this thread with some pics all assembled on the engine.
  9. SubiePimp
    Went to SJR LIFT TODAY:banana: PURCHASED MY EA TO EJ ADAPTER KIT, wich includes a re-machined flywheel to fit the ej series motor, engine to transmission adapter plate, and all necessary hardware. Most people dont get to go to the shop, they just order online from scott. i got to meet him and hes a really cool guy and has some sweet riggs. THANX AGIAN SCOTT, hope to be helping you out reall soon. so here it is on my 2.5l. the blue x's are torque sealed so i know that they have been torqued to the right ft lbs.
  10. SubiePimp
    one more pic of the engine from the top. cant wait to drop this Mot@#r F&@k#r in
  11. SubiePimp
    just got my oil pressure adapter from perrin. 80 bucks but will be well worth it when i go to plumb the oil pressure:brow:
  12. SubiePimp
  13. SubiePimp
  14. SubiePimp
    Here is a picture of the engine once i got it cleaned up and ready to put in. This engine has a Perrin light Weight Crank pully, Perrin Oil pressure adapter, Gates Racing Serpentine Belt, Injen Cold air intake, Ralli-Tek Piggy Back ECU (within wiring harness) wich is a black box add on to the ECU to control ignition + - and A/F ratio along with Diffrent maps for diffrent stages of tuning. it is super clean and has been rebuit with new headgaskets, thermostats, Seals all around and full synthetic oils everytime. and i did the timing belt when the headgasket was done about. 15000 miles ago:grin: For a naturally aspirtated subaru engine its got some grunt:cool:
  15. SubiePimp
    ok so after all my research i have finally decided to Swap my 1992 Subaru loyale Push Button 4WD 1.8L SPFI for my 2.5L SOHC Phase 2 powerplant out of a 2002 subaru impreza 2.5 RS. I will post pics reall soon..
  16. SubiePimp
    I HAVE A 92 LOYALE PUSH BUTTON 4WD. I ORDERED THE EA TO EJ ADAPTER KIT FROM SJR LIFT. BUT NOW IM HAVING TROUBLE FINDING A NON OEM REPLACEMENT CLUTCH FOR MY SWAP. JUST CURIOUS IF ANYBODY HAD ANY SUGGESTIONS ON SOMETHING THAT WILL HOLD UP OR EXAMPLES OF CLUTCHES THEY MIGHT HAVE USED IN A LOYALE SWAP IN THE PAST. ANY HELP IS APPRECIATED. THANX i have also heard that the xt6 is the best clutch you can get fro the S/R pb 4WD.NOT SURE IF ITS TRUE THO.http://www.ultimatesubaru.org/forum/images/smilies/banghead.gif THANX Eric.http://www.ultimatesubaru.org/forum/images/smilies/dead_horse.gif
  17. SubiePimp

    ok i will send off in about 3 weeks it will have the harness. i had a rallitek piggyback ecu installed down at ralliTek is it possible to keep the piggyback ecu with the cut down harness? i will send it with the wires it is still wired into the harness. either way i still need it done. thanx agian and like i said i will send it off here shortly and dont worry about the time im in no rush. I will ship it to you and then send u a 350.00 money order when u let me know its done. so just keep in touch. thanx bro.

  18. SubiePimp

    hey shawn i contacted u a couple months back about doing a ej2.5l Engine Harness out of a 02 impreza rs. i just wanted to touch base before i ship it off. If you could PM Me and let me know its ok to send i will now. I have the address and am ready to ship out to you.

  19. SubiePimp
    try a junk yard in your city or you can always buy a new one......if your made out of money
  20. SubiePimp
    can u private message me an give me an address to send it to and what form of paymeny that you would like cash, money order, paypal etc. Maybe a phone number. sounds like a good deal. its going to be like a week or two un til i send it out but would like to get a shipping estimate and have it ready to go asap. thanx agian bro appriciate it lots....
  21. SubiePimp
    can u give me a complete rundown of what u are going to do and do u label the wires that need to be spliced into the loyale? sounds good tho and i need to have this done and sent out to whom ever in like three weeks from now. Do u offer anykind of warenty or defect fix of any time period like 30 days or so? if not its cool but just curious? I Am very intrested and probley gona send it to you just need to know the details........ ITS A DEAL IF U CAN PROVIDE DETAILED Installation instructions.........thanx
  22. SubiePimp
    ok so here is the deal. I have a 02 impreza wireing loom (complete) with ecu and cruise control box, etc. and i am looking for someone who i can send it to and have the wiring loom cut down to control a 2.5L SOHC Motor US SPEC out of a 02 impreza RS. I just need the engine control no transmission or anything like that. This motor will be put into a 1992 Subaru Loyale 4WD 5 SPEED E82. any help is appriciated.
  23. SubiePimp

    hey whats up dawg...anyways got a huge question for ya. i am trying to cut down a 2002 impreza rs 2.5L SOHC wiring loom to fit into a 1992 loyale that had a 1.8l in it. just curious if you can help me out with a schematic of how you do it or an outline on what u do and whats you take out of the loom. basically im looking for instructions would be willing to fork out some dough.......hit me back

  24. SubiePimp
    ok......... so here we go........... i have the complete wiring loom for the engine for a 2002 subaru impreza us spec 2.5rs 2.5L SOHC Engine, it came complete from the donor car. i plan on putting it into a 1992 subaru loyale. so i am just curious as to what to keep within the wiring loom and what wires need to be spliced from the wiring loom to the ea82 loyale. i am looking for specific and detailed info on this i cant seem to find it anywhere online. i looked into having it done by Numbchucksconversions.com but he only went to the model year of 2001. i wrote an email and am waiting on a resopone. if ur out there numbchuck hit me up. Thanx for any help guys.....happy modding.
  25. SubiePimp
    i have a question for ya. i have a 1992 subaru loyale 1.8L spfi us spec. and am swapping a 2.5l sohc motor into it. i am taking the ecu and wiring from doner car and have the adapter plate for the transmission to use the loyales drivetrain and machined flywheel to fit ej series motor. my question is do i need to upgrade the fuel pump from the loyale 1.8l spfi to make the 2.5l motor work? the 2.5l motor is efi and the loyale is spfi. so i guess my question is will this fuel pump work for the Efi 2.5L SOHC engine or do i need to upgrade it. thanx
×
×
  • Create New...