guyph_01
-
Posts
29 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Posts posted by guyph_01
-
-
Hi Guys,
Has anyone here done this? I had a search and couldn't find much. Would anyone know of someone build thread were it has been done or would any one have any tips?
I understand that to achieve this, I need the dash harness ( the medium harness from digi to body harness) and also the fuel gauge sending unit as the digi cars use a different sender in the gas tank.
And i was able to get those:) Yes its a good working one:)
Also a wiring diagram would help a lot to figure out what wire is what:)
Any help would be greatly appreciated:)
Thx
-
Only one way to find out:D
-
Thx for the help:)
-
Hi guys,
I have searched but didn't find anything yet. Would anyone know or has done a write up on converting the loyal head lights from single to twin lights?
I'm about to attempt this any a write up or any help would be greatly appreciated.
Thx
Guy
-
yes, thx. But do i still use my original Single headlight grill and corner indicators Or do i need to get them from the twin headlight Dl too?
-
Would you be able to help me find the parts I need?
I have a full set for ea81 twin headlights already.
Or show me pics of the parts I need. I didn't quite fully understand what I need exactly.
Thx
-
Hi guys,
I've seen a few pics of cars with this done and i was wandering if someone did a write up on how do do it. I've got the parts but i'm not to sure how much cutting, drilling etc is needed. What needs to be done to the side indicators etc???
Like on those: sry if i used you cars pic:)
Also, i was wandering once its done, how do you make sure the angle of the lights are rite for driving.
Any info would greatly be appreciated.
Thx
-
Ok, If you get lucky plz email me:)
Thx
-
Nice, First time I see one of them. Definitely makes the car special and one of a kind. Keen to see what you come up with next:)
Btw, was wandering if you could help, I'm after one of them, http://www.ultimatesubaru.org/forum/showthread.php?t=120914
Plz let me know if you come across one when you go at the wreckers.
Thx
P.s I found myself a hi-rise console:cool:
thx for the help
-
Hi mate,
Great work on the car, pretty special monster:) was interesting reading through your build thread. I was wandering if you could help me. I see that the car was single range and you converted it to dual range, I'm basically after a grey gear knob with the push 4wd button and was wandering if you your car had it and if your not using in any more. Would you sell it if you have it somewhere?
Here is my link with a pic of what i'm looking for.
http://www.ultimatesubaru.org/forum/showthread.php?t=120914
Thx again, keen to see the other upgrades you plan to do to the car:)
Guy
-
Hi, I would be interested in buying the pushbotton mechanism gear knob if your not going to use it. Plz let me know. You can email me on guyph@yahoo.com
Thx
-
Hi, I would be interested in buying the pushbotton mechanism gear knob if your not going to use it. Plz let me know.
Thx
-
This is my setup and the one on my bro's brumby:)
-
yes but no luck. I'll check the post and bump it up.
-
Hi guys,
I'm after some parts to adapt and make my car special. Mainly after factory cosmetic parts or accessories that are available on different loyal range.
I would greatly appriciate if people could help and tell me what they think are the special parts that those models have, and a description and details on what car it comes from so i can hopefully find some. It could be anything from body acc, interior or even specials cruise control units.
Up to now i saw,
The hi rise consoles that are from auto belt cars.
The RX grills that are a bit special
I'm interested in buying those parts so if you have something special let me know. I can't pm but my email is guyph_01@yahoo.com.
Would also appriciate any info on other "special" parts
Thx
-
Hi mate,
Congrats for your car. You defintly got a sexy beast there and love the amber, like you said makes it stand out.
I wanted to ask you, Do you know from what model does the highrise center console come from. I'm very keen on a grey one:)
Thx
-
Hi guys,
I still havent had any luck finding the info, wiering diagrams for this engine. Would someone plz help me as i will soon be starting the conversion.
Thx
-
Hi guys,
I'm new to this site. I was hoping you guys could help me out. I have bought a EJ25 Quadcam for a conversion im doing here in Australia and i'm looking for any info on the EJ25 Quadcam engine that is from a Gen3 Outback.. I know they weren't available in Aus.. so I'm hoping someone overseas has some info like specs and wiring diagram.
The only info I have is the engine code EJ254DXDBE and it's from a 2002 Subaru Lancaster (Outback)
The heads looked like AVCS type. It definately came from a Gen3 model with the larger headlight design
Any advise and help would be much appreciated
thx
Guy
Wanted Single to twin lights conversion write up for the EA82 loyal.
in Subaru Retrofitting
Posted
Well its was all bolt on for me. as easy as that. Now i need to figure out the wiring side. Did you guys have any luck?